Fits Model Year(s):  All makes and models

Dimensions: 1 inch Wicked Wire Barbed Wire Stripe. Comes in 1" X 98" Strips. You can choose a 2 strip or 4 strip kit. 

Features:  This is a wicked wire pinstripe and the colors consist of Pewter Metallic, Magnesium Metallic, Dark Titanium Metallic and Black. This is exceptionally engineered high performance vinyl. This is 'the best' in the industry. These stripes have unmatched quality and are a perfect auto pinstriping tape for outdoor durability on all auto, RV and marine applications. Please measure each side of your vehicle to determine the length of stripe you need. The 2 piece wicked wire barbed wire kit contains (2) 8-foot sections for a total of 16 feet of printed barbed wire stripe. The 4 piece kit contains a total of 32 feet of wicked wire striping.

Exterior Durability: 5 to 7 years 

Application Instructions: Application is best if applied in temperatures between 55 and 85 degrees fahrenheit.  1. All adhesive applications must be applied to a clean surface, free of all wax, oil and grease(see our installation supplies for cleaner). 2. Remove back paper liner exposing adhesive. 3. Position striping, being careful not to stretch the vinyl. 4. Lay striping onto the application surface, then go over the entire surface gently with an application squeegee to ensure bond. 5. Carefully remove the protective premask by pulling parallel with the stripe immediately after application. 6.To assure a permanent bond please allow at least 72 hours in direct sunlight before washing or waxing.